Gosvor Robotic Pool Vacuum Cleaner Review: 3 Things I Love
My hands-on take on the Gosper robotic pool vacuum cleaner: wall-climbing brushes, an easy filter, app cleaning modes, and the one job it can't do.
Reviewed by
Scott Ayres
Welcome to the Product Demo lab where I (Scott) demo products so you can make an educated buying decision. I keep it real, honest and laid back.
This post contains affiliate links. I may earn a commission at no extra cost to you.
Quick Verdict
It climbs the walls and scrubs them with little brushes, and that alone sold me. This Gosvor robotic pool vacuum cleaner runs 2.5 to 3 hours picking up leaves and dead bugs, and it’s one of the least expensive units I’ve seen on the market. Just know going in: it’s made for debris, not for algae scrubbing.
Buy if you:
- Have an above ground or inground pool collecting leaves and bugs
- Want wall brushes, not just a floor crawler
- Like picking cleaning modes from an app
- Want a lightweight unit that’s easy to rinse out
Skip if you:
- Are fighting a real algae buildup, because this won’t lift that
- Want a unit you never have to rinse between runs
- Expect it to replace balancing your water chemistry
Clicking takes you to the seller’s website. We may earn a small commission if you purchase, at no extra cost to you.
Why This Robotic Pool Vacuum Cleaner Won Me Over
Every budget cleaner I’ve tested before this one stops at the waterline, it vacuums the floor and that’s the end of the conversation. The Gosvor climbs past it and scrubs the walls with small rotating brushes, and watching that happen the first time is genuinely surprising. That’s the feature I keep coming back to, and it’s what separates this from every floor-crawler in the same price range. You can grab it on Amazon right here at the current price, and I’ll walk you through what it does well and the one thing it flat out won’t do.
What You’re Getting With the Gosvor
Cordless design, app-controlled, runs 2.5, 3 hours per cycle picking up leaves and bugs on both floor and walls. The whole body piece is your filter, so there’s nothing awkward to unscrew and dig into. Inside, it comes with a removable dirt and algae filter that catches all the micro particles. It connects to an app, and it runs a cleaning cycle of about 2.5 to 3 hours before it’s done. Here are the concrete numbers worth knowing.
I Tossed It In and Let It Run the Floor
Floor-only mode: it runs 2.5, 3 hours picking up leaves and dead bugs, turning itself at walls instead of getting stuck. This thing moves back and forth for about 2.5 to 3 hours, picking up any leaves, dead bugs, and all those kinds of things on the bottom of your pool. When it encounters a wall, it turns itself around and heads back the other way. Simple, and it doesn’t get stuck in a corner sulking.
The path is your call. You can run the S pattern, where it kind of goes back and forth like a big snake, or you can hop into the app and switch it to go round and round and round. For a debris pickup on the floor, the S pattern covered the ground the way I wanted. And the wall brushes are the standout. Watching it climb up and scrub with those little brushes is the part that made me go, that is fantastic.
It Won’t Touch Algae, and I’ll Say So
This is made to pick up debris. It’s not made to get the algae stuff up that I had to deal with. That’s the catch, and I’m not going to pretend otherwise. If you’ve got algae clinging to your pool, this vacuum isn’t your fix for that. It’s built for leaves, dead bugs, and the loose stuff that settles on the bottom, not for scrubbing a green film off the surfaces. Balance your water and handle the algae separately, then let this handle the debris it was designed for. Set that expectation right and you won’t be annoyed.
Get it now
Gosper Robotic Pool Vacuum Cleaner
Get the best price on Amazon βThis post contains affiliate links. I may earn a commission at no extra cost to you.
Who This Vacuum Actually Fits
This vacuum fits one specific situation well: a pool that collects leaves and dead bugs faster than you want to deal with them manually. If that’s your pool, the app modes give you real options, walls-only before a party, periodic mode for weekly upkeep, S-pattern when you just want the floor done fast. It’s lightweight enough that pulling it out and rinsing the filter after a 2.5-hour cycle doesn’t feel like a second chore. Where it falls apart is algae, if that’s your actual problem, this isn’t your tool.
My Advice Before You Buy It
One practical note before your first run: open the app and pick your mode before you drop it in the water, not after, switching mid-cycle means pulling it out. For a first pass on a leaf-covered floor, the S pattern is the right call; round-and-round is better for wall-only runs where you want full perimeter coverage. Rinse the removable filter after every cycle, not every few. Skip that once and the next run noticeably underperforms. That’s genuinely the whole maintenance ask.
Pros
- Climbs and scrubs the walls with little brushes, not just the floor
- The whole body is the filter, so no digging into a hidden compartment
- Removable dirt and algae filter catches micro particles
- App gives you walls-and-floors, floors, walls, or periodic modes plus S pattern and round-and-round paths
- Super lightweight and super easy to clean, and one of the cheapest units I’ve seen
Cons
- Won’t lift algae buildup, it’s built for debris only
- You have to rinse the filter after each 2.5 to 3 hour cycle
- Needs the app to unlock the full range of modes
Frequently Asked Questions
Does this pool vacuum work in an inground pool?
Yes. It works whether it’s an above ground pool or an inground pool. It’s designed to handle both, so you’re not locked into one setup.
How do I clean the filter?
The whole body piece is the filter, and inside there’s a removable dirt and algae filter you pull out and rinse. It’s super easy to clean, which is one of the things I like most. Do it after each run and it keeps catching the micro particles.
How long does one cleaning cycle take?
About 2.5 to 3 hours. It moves back and forth across the pool bottom for that whole stretch, picking up leaves, dead bugs, and other debris before it’s done.
Can it get algae off my pool?
No. This is made to pick up debris, not to scrub algae. If you’re fighting algae, you’ll want to treat that with your water chemistry and let this handle the leaves and bugs.
Do I have to use the app?
You connect to the app to pick your mode, so it’s how you switch between walls and floors, floors only, walls only, or periodic cleaning. It’s also where you change the path from S pattern to round-and-round. You can toss it in for a basic floor clean, but the app is where the choices live.
What’s the difference between the S pattern and round-and-round modes?
The S pattern goes back and forth like a big snake across the pool, while round-and-round circles the pool repeatedly. Pick whichever covers your pool shape better. I used the S pattern for a straightforward floor pickup.
Is it heavy to lift out of the pool?
No, it’s super lightweight. That matters because you’re the one pulling it out and rinsing the filter after each cycle, and a heavy unit makes that a chore.
Is this a good pick if it’s my first robotic pool cleaner?
Yes, especially on price, since it’s one of the least expensive units I’ve seen. The app modes are simple and the filter is easy to clean, so it’s a low-stress way to try a robotic cleaner without a big spend.
Get it now
Gosper Robotic Pool Vacuum Cleaner
Get the best price on Amazon βThis post contains affiliate links. I may earn a commission at no extra cost to you.
ποΈ Shop everything in this video
Every product mentioned, in one place β these are affiliate links, so I may earn a small commission at no extra cost to you.
ποΈ Gosvor Robotic Pool Vacuum Cleaner β check price on Amazon β
About the reviewer
Scott Ayres
Welcome to the Product Demo lab where I (Scott) demo products so you can make an educated buying decision. I keep it real, honest and laid back.
