Beatbot AquaSense 2 Cordless Robotic Pool Vacuum Cleaner Review
A hands-on look at the Beatbot AquaSense 2 cordless robotic pool vacuum, from floor scrubbing to how it floats itself to the surface when done.
Reviewed by
Scott Ayres
Welcome to the Product Demo lab where I (Scott) demo products so you can make an educated buying decision. I keep it real, honest and laid back.
This post contains affiliate links. I may earn a commission at no extra cost to you.
Quick Verdict
It fills itself with air and floats to the surface when it’s done, so no hook, no reaching in. This is a really sweet little pool vacuum that takes its time and doesn’t miss stuff, and the edge-cleaning wheels are something I haven’t seen on anything else.
Buy if you:
- are tired of fishing a corded robot out of the deep end with a hook
- want the floor, walls, and waterline all cleaned in one run
- have a pool up to 3,230 sq ft and want it done cordless
- go on vacation and want a robot that cleans on its own every 48 hours
Skip if you:
- want instant action, it takes a good 2 minutes to fill and kick in before it does anything
- don’t want to rinse out an open filter basket after each run
- are shopping purely on price, this isn’t the cheap end of the pool robot shelf
Clicking takes you to the seller's website. We may earn a small commission if you purchase, at no extra cost to you.
| Battery | 10,000mAh |
|---|---|
| Run time | Up to 4 hrs floor / 3.5 hrs wall & waterline |
| Coverage | Pools up to 3,230 sq ft |
| Navigation | CleverNav, 4-core CPU, 16 sensors |
| Recharge | ~4 hrs on wireless dock |
| Warranty | 3-year full machine replacement |
Pool Vacuum Returns Itself When Cleaning Is Complete
The end of the run is what got me. When the back cleaning finishes, this pool vacuum just fills itself up with air and floats at the top, so you don’t have to grab your hook out to get it. That’s a really sweet little touch on a robot that already does more than I expected. This is the Beatbot AquaSense 2, a cordless robotic pool vacuum that cleans the floor, the walls, and the waterline in one go. Couple things about it stood out right away, and the surface parking trick was the first.
Most robots I’ve dealt with make you fish them out from the deep end. Not this one. When it’s finished it comes up on its own so you just reach down, lift it, and let the water drain out.
What’s Actually On This Thing
Dual front and back roller brushes run the whole time, floor, wall, waterline, no pausing between surfaces. Bulldozer-style tires handle depth changes and wall climbs without getting stuck. But the part I keep coming back to is the edge-cleaning wheels on the sides. They press against the pool wall so the robot hugs the edge instead of bouncing off it and spending time reorienting, a detail I haven’t seen on any other robot I’ve tested. Little wheels get up against the edge of your pool wall, and that’s what keeps it from running into things and getting all messed up and having to redirect.
Inside it’s a simple open basket. You just take it out whenever you want to clean it. It connects to an app where you can choose different cleaning types. There’s an eco mode that cleans every 48 hours for you, like when you’re on vacation. For this run I put it in standard mode, which is floor, wall, and waterline all together.
Watching It Map the Pool and Get to Work
Once it hit the water, it took a good 2 minutes to fill up before it kicked in. Here’s the interesting thing with this one, that pause is normal. Once it does kick in, it starts mapping out your pool using the AquaSense AI camera, seeing what’s happening and what’s in the water and figuring out its plan. I let it sink to the bottom and just watched.
It kicked in and started figuring out the shape, the depth, all that sort of stuff. Then I saw a bubble come out, which is when it’s sucking things in and running its filtering. In standard mode it splits the run between the floor, the walls, and the waterline. On the floor it uses that edge cleaning to get really close to the wall and works around and around the pool, then spirals closer to the inside as it goes.
What I really like about this one is it’s slow. Some of them move too fast and I don’t feel like they scrub much. This one’s taking its time getting everything so it doesn’t miss stuff, and with that AI it can see things, slow down, and make sure it gets them. The fact that it moves a little slower, I appreciate. After only half the time on the floor, that pool floor looked amazing.
The Waterline Move That Stands Apart
Watching it climb the wall is where this pool vacuum surprised me. It comes up out of the water scrubbing the whole line as it goes, but here’s the unique part: it’s not going all the way out like a lot of robots do. It just stays on the wall itself, works that waterline, then adjusts and turns and comes back up, overlapping itself a little. I don’t think I’ve normally seen one do that.
The brushes are soft enough not to scratch tile but stiff enough to lift algae film off the wall. The time split, floor for the first half, walls and waterline for the second, means neither surface gets shortchanged. When it parked itself at the top, I could see the waterline ring that had been there was gone.
The 2-Minute Wait Before It Does Anything
That startup pause is the one thing you should know going in. When it first goes in the water it sits there filling up for a good 2 minutes before it kicks in, and if you didn’t know that, you’d think something was wrong and start poking at it. It’s not broken. It’s just filling and then mapping with the camera before it commits to a path.
The other small chore is the basket. It’s an open basket, so once the run’s done you pull it straight out, and you can see all the debris sitting in there. Then you go rinse and clean it out. Not a big deal, but it’s a hands-on step every cycle, so don’t expect a fully set-it-and-forget-it experience.
Get it now
Beatbot AquaSense 2 Pool Vacuum
Get the best price on Amazon →This post contains affiliate links. I may earn a commission at no extra cost to you.
Who This Robotic Pool Vacuum Fits
If you’ve ever stood at the deep end with a hook trying to snag a robot that sank into the corner, the AquaSense 2 solves that specific misery first. Drop it in, walk away, come back to it floating at the surface ready to lift one-handed. For pools up to 3,230 sq ft that need floor, wall, and waterline coverage in a single cordless run, nothing else I’ve tested handles all three without a cord dragging behind it.
It’s also a great fit for people who travel. That eco mode running a clean every 48 hours means you can leave and come back to a pool that didn’t turn green. And if you’re upgrading from an older, faster, cheaper robot that never seemed to scrub much, the slower and more deliberate approach here is the whole point.
A Couple Tips Before Your First Run
Set your mode in the app before you drop it in. There’s floor-only mode, which runs up to 4 hours, and the standard floor-wall-waterline mode I used. Pick the one that matches what your pool needs that day instead of defaulting.
Give it the 2 minutes. Don’t stand there thinking it’s dead. Let it fill, sink, and map, and it’ll kick in on its own. When it’s done, it floats up, you lift it, let the clean water drain back in, pull the basket, rinse it, and set it on the charger. That’s the routine. It recharges in about 4 hours on the wireless dock and it’s good to go again.
Pros
- Floats itself to the surface when done, so no hook needed to retrieve it
- Edge-cleaning wheels keep it from banging into walls and having to redirect
- Cleans floor, walls, and waterline in one standard-mode run
- Moves slow and deliberate, so it scrubs thoroughly and doesn’t miss spots
- Waterline scrubbing stays on the wall instead of flopping all the way out
Cons
- Takes a good 2 minutes to fill and kick in before it starts, which looks like nothing’s happening
- Open filter basket needs a rinse after every cycle
- Slower pace means a full clean isn’t quick if you’re impatient
Frequently Asked Questions
Does the Beatbot AquaSense 2 need to be plugged in while cleaning?
No, it’s fully cordless. It runs off a 10,000mAh battery, so there’s no cable trailing into the pool. You only plug it into the wireless dock afterward to recharge.
How long does it take to recharge?
About 4 hours on the wireless charging dock. That gets you back to a full charge, which is up to 4 hours of floor cleaning or 3.5 hours of wall and waterline work.
How big a pool can it handle?
Up to 3,230 sq ft on a single charge. That covers most residential in-ground pools comfortably in one run.
How do I clean the filter?
It’s an open basket that pulls straight out of the top after each run. You just rinse it out under a hose and drop it back in. Plan on doing it every cycle since you’ll see all the debris collected in there.
Can it climb and clean the waterline?
Yes. In standard mode it climbs the walls and scrubs the waterline, staying on the wall itself rather than launching all the way out of the water. It splits its time between the floor and the walls and waterline.
Do I have to use the app?
The app lets you pick cleaning modes like floor-only, the full floor-wall-waterline standard mode, and the eco mode that cleans every 48 hours. You’ll want it to choose your mode and to call the robot back to the surface when it’s parked up top.
What happens when the battery runs low mid-clean?
It parks itself at the surface when the battery gets low or when the cleaning is done. That means you lift it out, drain it, and set it on the dock to recharge instead of having to dive for it.
Is there any warranty if something goes wrong?
Yes, there’s a 3-year protection plan that does full machine replacement rather than repairs. So if it fails within that window, you get a replacement instead of waiting on a fix.
Will it work if I only want the floor cleaned?
Yes, there’s a dedicated floor-only mode that runs up to 4 hours. Pick it in the app if your walls and waterline are already clean and you just want the bottom scrubbed.
Get it now
Beatbot AquaSense 2 Pool Vacuum
Get the best price on Amazon →This post contains affiliate links. I may earn a commission at no extra cost to you.
🛍️ Shop everything in this video
Every product mentioned, in one place — these are affiliate links, so I may earn a small commission at no extra cost to you.
🛍️ Beatbot Robot Pool Vacuum Cleaner — check price on Amazon →
About the reviewer
Scott Ayres
Welcome to the Product Demo lab where I (Scott) demo products so you can make an educated buying decision. I keep it real, honest and laid back.
