Product Demo Lab
Product Demo Lab Browse the Lab and find something you like!
Home & Kitchen

Memory Foam Ergonomic Seat Cushion: Tailbone Relief

I tested a memory foam ergonomic seat cushion for desk chairs. Cutout for tailbone relief, washable cover, and strap locks. Here's how it sits.

Scott Ayres

Reviewed by

Scott Ayres

Welcome to the Product Demo lab where I (Scott) demo products so you can make an educated buying decision. I keep it real, honest and laid back.

This post contains affiliate links. I may earn a commission at no extra cost to you.

Watch Our Review

Quick Verdict

I sat on this ergonomic seat cushion wrong for the first few days, cutout facing forward, before I figured out the opening goes toward the back. Once I flipped it, the bony feeling at my tailbone disappeared and I was sitting up straighter without trying. It’s a solid memory foam cushion that stays put and comes back to shape when you stand.

Buy if you:

  • Sit at a desk all day working from home and your tailbone starts complaining
  • Want a cushion that locks to the chair so it won’t fall when you scoot off fast
  • Need a washable cover because drinks and daily use happen
  • Sit a little lower at your desk than you’d like
MaterialHigh-density memory foam
CoverRemovable, washable, zippered
BaseSlip-resistant bottom
DesignTailbone cutout for coccyx relief
AttachmentAdjustable buckle strap locks

Why Your Ergonomic Seat Cushion Cutout Faces Back

After three days of eight-hour stretches at my desk, my tailbone was screaming, so I pulled this ergonomic seat cushion out of the box and immediately sat on it the wrong way for another three days. Once I got the orientation right, the tailbone pressure was gone by mid-morning. What surprised me wasn’t any single feature, it was how much a slip-resistant base, a rear cutout, and a washable cover add up when you’re logging a full workday in the same chair.

Here’s my confession up front. I set on it wrong for a while. I’d plop down with the cutout facing me instead of behind me. Wrong way. The opening is supposed to point toward the back so your tailbone has somewhere to go.

What’s Actually Built Into It

High-density foam with a slip-resistant base that grips leather and cloth without sliding, and that base matters more than you’d think, especially if you’re constantly pushing away from the desk. The cover comes off too. There’s a zipper along the edge, so when I eventually spilled coffee on it, I just pulled the cover and threw it in the wash. For something you’re sitting on eight hours a day, that’s not a nice-to-have.

Want the best Amazon finds in your inbox?

A short monthly email with the products I tested + actually liked. No spam.

The shape is the whole point. There’s an opening cut out at the back for your tailbone, so when you sit down you’ve got support underneath and support behind you at the same time.

Spec Detail
MaterialHigh-density memory foam
CoverRemovable, machine-washable, zippered
BaseSlip-resistant, works on leather or cloth
Ergonomic designRear cutout for tailbone/coccyx relief
AttachmentAdjustable straps with buckle locks

A Full Day at the Desk Feels Less Bony

Once I got the orientation right, it changed how a long work day feels. I sit taller, and it’s a less bony feeling, if you know what I mean. Less like the chair is pushing up on me. My posture is better because the cushion nudges me to sit up straight instead of slouching down into it. That takes some stress off the joints over an eight-hour stretch.

The memory foam does its job too. It compresses under you while you’re sitting, then comes back up to its original shape when you get off of it. It’s just a really nice feel. Not squishy, not brick-hard. If you’ve been sitting on a plain chair pad that flattens out by lunchtime, this is a different experience.

It Ships Rolled Up and Feels Loose at First

Here’s the part the product page won’t warn you about. When it first came, it came all rolled up, and I had to let it sit for about a day for it to fluff out. Fresh out of the box the cover feels really, really loose on it. That threw me for a second. But that’s just because all the air has been pressed out of it during shipping and it needs time to expand. So juzj it up, let it sit a day, and it fills out fine.

The other gotcha is the one I already admitted to. It’s not obvious which way you’re supposed to sit, and I did it wrong at first. Cutout toward the back, every time. If you skip that, you lose the whole point of the design and wonder why your tailbone still hurts.

Learn more

Memory Foam Ergonomic Seat Cushion

Get the best price today →

This post contains affiliate links. I may earn a commission at no extra cost to you.

Memory Foam Ergonomic Seat Cushion: Tailbone Relief

Who This Is Actually For

Best for remote workers, students, and gamers who sit for 6+ hours and need tailbone relief and posture support. Same goes for students glued to a study chair, or gamers who don’t move for hours. Anyone whose tailbone or posture takes a beating from long sitting sessions is the target here. The straps also make it good for a chair you scoot around on a lot, since it won’t slide off with you.

The Strap Locks Are the Quiet Hero

One cool thing they did with this one is the strap system. It has little locks on it. You feed the strap through, and it locks right there, then you do the same on the other side. The buckle comes loose so you can wrap it around the chair back, then click it shut. Now it’s strapped in and it’s less likely to fall off. If you scoot off real fast, it stays put instead of flopping onto the floor. It’s the setup step you’ll be tempted to skip, but it’s worth doing because it keeps the cushion locked when you scoot away fast.

Advice Before You Grab One

Two things before you judge it. Let it expand for a full day, the cover will feel weirdly baggy until the foam fills out, and that’s normal. And orient the cutout toward the back; I sat on it wrong for three days and felt nothing. Do those two things, clip the strap, and the cushion earns its keep. Skip either step and you’ll write a one-star review about a problem you caused yourself.

Pros

  • Slip-resistant bottom holds on leather or cloth chairs
  • Solid memory foam that rebounds to shape after you stand
  • Rear tailbone cutout takes the bony pressure off
  • Removable, washable zippered cover
  • Buckle strap locks keep it from falling when you scoot

Cons

  • Ships rolled up and needs a full day to fluff out
  • Cover feels really loose out of the box until the foam expands
  • The correct sitting orientation isn’t obvious, easy to sit on it wrong

Frequently Asked Questions

Can I use this ergonomic seat cushion in a car seat?

Yes, the design and slip-resistant base work in a car seat as well as an office chair. The strap system that locks it to a chair back is aimed at desk chairs, but the cushion itself sits fine on any flat seat.

How do I wash the cover?

Unzip the cover, pull it off the foam, and wash just the cover. There’s a zipper along the edge for exactly this. Don’t toss the whole memory foam core in the machine, only the cover comes off.

Why does the cover feel so loose when it arrives?

Because the air was pressed out for shipping and the foam is still compressed. It arrives rolled up, and it needs about a day to expand and fill the cover. Give it 24 hours before deciding anything.

Which way am I supposed to sit on it?

The cutout opening faces toward the back of the chair, so your tailbone sits over the gap. I sat on it the wrong way at first, so it’s a common mistake. Flip it if your tailbone still feels pressure.

Will it slide around on a leather chair?

No, the slip-resistant bottom grips leather and cloth alike. On top of that, the buckle straps lock it to the chair back so it can’t move even if you scoot around fast.

Does it help with posture or just comfort?

Both, in my experience. The shape nudges you to sit up straighter instead of slouching into a flat pad, which is what took some stress off my joints over a full work day.

Does the foam flatten out over a long day?

It didn’t for me. It compresses while you sit and springs back to its original shape once you stand up. That rebound is the difference between this and a cheap pad that stays flat by lunchtime.

Do I have to use the straps?

No, they’re optional. The slip-resistant base alone keeps it fairly stable. The straps just add insurance so the cushion won’t fall off when you push away from the desk quickly.

4.3
/5
★★★★½
Excellent
Performance 4.4
Durability 4.2
Comfort 4.5
Value 4.1
Daily use Work from home
The compressed-on-arrival and loose-cover phase lasts exactly 24 hours; orientation confusion costs it 0.7 points. Skip it only if you won’t wait a day or won’t read the back-facing detail. Stamped orientation on the foam itself would push this to 5.0.
🔗 Get the best price today →

Clicking takes you to the seller's website. We may earn a small commission if you purchase, at no extra cost to you.

Learn more

Memory Foam Ergonomic Seat Cushion

Get the best price today →

This post contains affiliate links. I may earn a commission at no extra cost to you.

Memory Foam Ergonomic Seat Cushion: Tailbone Relief
#SeatCushion #ErgonomicCushion #OfficeChair #MemoryFoam #TailbonePain #CoccyxCushion #WorkFromHome #HomeOffice #PostureSupport #DeskSetup

🛍️ Shop everything in this video

Every product mentioned, in one place — these are affiliate links, so I may earn a small commission at no extra cost to you.

🛍️ Memory Foam Seat Cushion with Slip Resistant Bottom and Strapscheck price on Amazon →

Scott Ayres

About the reviewer

Scott Ayres

Welcome to the Product Demo lab where I (Scott) demo products so you can make an educated buying decision. I keep it real, honest and laid back.

About us

Scott

Editors’ Pick
Verdict